DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
---|
2017-10-25 | 7601201009 | PRIMARY ALUMINUM ALLOY, ISPOLZUEMY FOR FURTHER PROMYSH. A356.2 PERERABOTKI BRAND CU 449-03-75, 449-03-40 The T / OBRAZNYH chushka ATTACHED | *** | SOUTH AFRICA | 362000 | 712516,08 | KRASNOYARSK | ***** | ***** |
2017-10-25 | 7601201009 | PRIMARY ALUMINUM ALLOY, ISPOLZUEMY FOR FURTHER PROMYSH. A356.2 PERERABOTKI BRAND CU 449-03-75, 449-03-40 The T / OBRAZNYH chushka ATTACHED | *** | SOUTH AFRICA | 362000 | 712516,08 | KRASNOYARSK | ***** | ***** |
2017-11-08 | 7604291009 | BAR aluminum alloy D16T circular cross-section of 100 mm diameter - 0.5 AM NOT A dual-use goods. ALLOY COMPOSITION: FE to 0.5%, SI to 0.5%, MN - 0.3-0.9%, CR - to 0.1%, TI - TO 0.15%, AL - 90.9-94.7%, CU - 3.8-4.9%, MG - | ABSENT | SOUTH AFRICA | 10.9 | 79,55 | CAPE TOWN | ***** | ***** |
2017-11-08 | 7607191000 | ALUMINUM FOIL, FOOD, in rolls of 150 m, the roll width 24 cm, thickness 11 microns - 5 PCS. NOT A dual-use goods | "Umnichki" | SOUTH AFRICA | 5 | 89,81 | CAPE TOWN | ***** | ***** |
2017-11-08 | 7604291009 | Bars and rods of cast aluminum alloys 6082; STANDARD EN755, EN 573; ROUND SECTION, DIAMETRHDLINA: 400X3000MM, MAKS.PREDEL TENSILE STRENGTH 371MPA; Further heat treatment not provide for the ultimate tensile strength of 460 MPa | COMBINED: drawing, KUMZ | SOUTH AFRICA | 3111 | 11138,51 | DURBAN | ***** | ***** |
2017-11-08 | 7606129900 | Plates from cast aluminum alloys 7075; STANDARD EN485, EN573, AMS-QQ-A-250, TOLSCHINAHSHIRINAHDLINA; 25X1380X2285MM, 30X1380X2285MM, 80X1520X3020MM, 90X1520X3020MM, 120X1520X3020MM, 140X1520X3020MM, an aluminum content of less than 99.0% by weight; METHOD | COMBINED: drawing, KUMZ | SOUTH AFRICA | 19080 | 87968,12 | DURBAN | ***** | ***** |
2017-11-16 | 7604291009 | Bars and rods of cast aluminum alloys; STANDARD EN573; EN755; ALLOY 6082 ROUND SECTION DIAMETRHDLINA 115X3000MM, 95X3000MM, 101,6X3000MM, 130X3000MM, 140X3000MM, 165X3000MM, 170X3000MM, square section STORONAHDLINA 20X3000MM, 50,8X3000MM, 60X | COMBINED: drawing, KUMZ | SOUTH AFRICA | 8832 | 25227,76 | DURBAN | ***** | ***** |
2017-11-16 | 7606129900 | Plates from cast aluminum alloys 6082; STANDARD EN573; EN485; TOLSCHINAHSHIRINAHDLINA; 20X1270X2520MM, 25X1270X2520MM, 30X1270X2520MM, 35X1270X2520MM, 40X1270X2520MM, 45X1270X2520MM, 50X1270X2520MM; Aluminum content less than 99.0% by weight; METHOD | COMBINED: drawing, KUMZ | SOUTH AFRICA | 14944 | 45966,36 | DURBAN | ***** | ***** |
2017-11-22 | 7616999008 | Aluminum products (NEW) FOR JET MACHINES | JET | SOUTH AFRICA | 1.6 | 13,66 | ST PETERSBURG | ***** | ***** |
2017-11-28 | 7608208907 | 1-PIPE aluminum alloy. | *** | SOUTH AFRICA | 470.3 | 13591,35 | JOHANNESBURG | ***** | ***** |