DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
---|
2017-10-17 | 7326909807 | PART metalworking equipment - GRAPHITE PAD 2.5 * 28 * 465 for the MS 2525 S-3603510361. It is a steel plate with ANTIFIRKTSIONNYM GRAPHITE COATED. Is bolted to the right and left guide of the upper beam. | DURMA | *** | 0.87 | 78,08 | BURSA | ***** | ***** |
2017-10-19 | 7326909807 | PART metalworking equipment - stop. Metal plate with three through holes. It is designed for fixation of the longitudinal movement of the lower WEDGE OF PAYMENT SYSTEMS deflection of the beam bending press. METHOD | DURMA | *** | 0.49 | 11,88 | BURSA | ***** | ***** |
2017-10-19 | 7326909807 | PART metalworking equipment - ADAPTER DRIVE. Steel plate with a through hole. INTENDED FOR FIXING TO WEDGE mechanical drive system of compensation deflection of the beam bending press. PREPARATION METHOD: | DURMA | *** | 1.1 | 6,73 | BURSA | ***** | ***** |
2017-10-19 | 7326909807 | PART metalworking equipment - spacers. STEEL PLATES. Designed to work as spacers when mounting the matrix on the system desktop PAYMENT deflection of the beam bending press. PREPARATION METHOD: | DURMA | *** | 7.88 | 65,40 | BURSA | ***** | ***** |
2017-10-19 | 7326909807 | OF METAL EQUIPMENT - PART clamping Dies. Metal plates are designed for mounting an array substrate on the desktop compensation system deflection of the beam bending press. METHOD OF MANUFACTURING: Turning and milling | DURMA | *** | 11.2 | 37,97 | BURSA | ***** | ***** |
2017-10-19 | 7318220009 | PART metalworking equipment - BELLEVILLE WASHER DIN 2093. used to achieve a tightness in the threaded joint compensation system deflection of the beam bending press. Material: Steel. | DURMA | *** | 0.15 | 294,06 | BURSA | ***** | ***** |
2017-10-19 | 7318169109 | PART metalworking equipment - NUT. An inner diameter of 10mm. DIN 917. Bolt locking requirements USED FOR ADJUSTMENT OF THE WEDGE MECHANISM OF PAYMENT deflection of the beam bending press. Material: Steel. | DURMA | *** | 0.01 | 2,36 | BURSA | ***** | ***** |
2017-10-19 | 7318154100 | OF METAL EQUIPMENT - BOLT WITHOUT HEAD INSTALLATION DIN 913 With a tensile strength of at least 800 MPa. It is used to adjust the stroke in a mechanical compensation system deflection of the beam bending press. | DURMA | *** | 0.01 | 1,77 | BURSA | ***** | ***** |
2017-10-19 | 7318156900 | PART metalworking equipment - a bolt with hexagon socket DIN 912. Used for mounting a mechanical drive to the compensation system deflection of the beam bending press. Material: Steel. | DURMA | *** | 1.59 | 18,61 | BURSA | ***** | ***** |
2017-10-19 | 7326909807 | PART metalworking equipment - wedge system KOMPENASII deflection. The system of two steel wedges complex profiles are used as a working body of the electromechanical system COMPENSATION deflection of the beam in the hydraulic | DURMA | *** | 50 | 424,02 | BURSA | ***** | ***** |